Find information on drivers, software, support, downloads and more for your Zebra MC9090 WM Mobile Computer. Drivers for specific webcam models, or links to project pages hosting code for drivers, are outlined in Section 2.3.The drivers are usually available one of three ways: within the kernel, as a compilable stand alone module, or available as a pre-compiled binary from your Linux distribution.

• Responsive Innovations Usb Devices Driver Updater
• Responsive Innovations USB Devices Driver
• Responsive Innovations Usb Devices Driver Download
• Responsive Innovations Usb Devices Driver Windows 10

But the driver has the version 6.7.2.0, please have a look at the screenshots from the device manager I attached. (They're in german, but I think that does'nt matter very much) This is the driver you get automatically if you connect a device for the first time, or if you 'force' Windows to get the latest drivers.

Overview

The S2USB485 is a USB to full-duplex RS-232 and half-duplex RS-485 serial converter integrated into a single device. In essence the S2USB485 is a single USB serial port that has two electrical interfaces available to it (RS-232 and RS-485). Either interface can be used without the need to set jumpers or change dip switch settings.

Details

Responsive Innovations Usb Devices Driver Updater

The S2USB485 can be used as a replacement to the Johnson Controls MM-CVT101 (RS-232 to N2 Bus) / CVTPro100 converter for those computers or laptops that have a USB interface. In addition to direct support for Johnson Controls software (Metasys, HVAC Pro, etc), the S2USB485 provides the following improved features and functionality:

• USB interface and so is supported by the latest laptops and operating systems
• Does not require an external power supply. The device is entirely USB interface powered
• Incorporates both a RS-232C and N2 (RS-485) bus interface so that multiple converters are not necessary.
• N2 Bus communication is supported under Windows 7 (32/64 bit), XP, 2000 directly.
• Transmit and Receive Indicators
• N2 Bus flow control internally controlled (i.e. no jumpers or resistors to add/modify)
• N2 Bus has end of line termination (EOL) enabled or disabled by an internal slide switch
• Designed and Manufactured in Canada using Industrial grade components
• ZoneBus is not officially supported.
• ROHS Compliant
• New Version (July 2008) now has enhanced overvoltage protection and internal auto reset-able thermal fuses in the event of high voltages present on the RS485 / N2 bus
• New Version (July 2008) includes enhanced mechanical rigidity of the RS485/N2 bus connector
• New Version (July 2008) includes OBD (On-Board Diagnostics) of the RS485/N2 Bus. OBD allows our S2USB485DiagN2 software to electrically analyze (voltage measuring) the RS485/N2 bus and indicate electrical issues to the user.
• As of July 2008, the anchored cable version of the S2USB485 (part number S2USB485-JC-C) has been reluctantly discontinued do to the quality issues with our anchored cable manufacturer. Only the S2USB485-JC-B is now offered with or without the required USB cable (a Type A to Type B).
• New Version (July 2008) Pricing has been maintained for this enhanced S2USB485 version. The included cable version is priced the same as the old anchored cable version
• Vista Tested and Compatible
• Tested and compatible with JCI's HVACPro and JCI's FX CommPro
• Windows 7 Compatible. Please see the two installation documents on the right for the procedure for using HVACPro/CommPro under Windows 7
• Windows 8/10 - Compatible Drivers have been released. They are located below under latest Drivers. Use the Windows 7 Installation document (also listed below) to install under Windows 8/10.
  
• Windows 64-bit - JCI software tools such as HVACPro, etc do not to work under 64-bit Windows Versions Natively. Windows 7 has XP mode which allowed for legacy applications to be used, but Windows 8/10 currently does not have an XP mode equivalent. It is recommended that HVACPro users, etc continue to use Windows XP or Windows 7 with XP Mode (only available with Windows 7 Pro or Ultimate). If you need to use Windows 8/10 with JCI Software tools you need to install a Licensed copy of Windows XP in your preferred Virtualuzation software (i.e. Virtual Box, VMWare, etc) under Windows 8.
  
• The S2USB485 is USB 3.0 Compatible. However, if you are using Windows XP (natively or via a virtual machine), be aware that USB 3.0 is not supported by Windows XP, as USB 3.0 was not invented when XP was supported and so there are no XP USB 3.0 Drivers available. To use USB 3.0 ports with XP and older operating systems, you will need to 'downgrade'your USB 3.0 ports to USB 2.0 (or legacy mode as some call it). This downgrade can vary from manufacturer to manufacturer and so consult with your computer manufacturer on how to do this (usually it is a BIOS setting change, etc.)
  
• Note Windows 10 Users:The most recent Windows 10 builds (1607 or newer) / updates have been enforcing a new requirement by MIcrosoft that all drivers must be signed using an enhanced Signing Certificate. In addition to this new certificate Microsoft is forcing all drivers to be reviewed and accepted by them. This means that Win10 users have no ability to disable Windows 10 driver signature enforcement and so any new drivers and their installation is at the sole discretion of Microsoft. Until this becomes remedied we have provided some specific Win10 drivers to those newer Windows 10 builds. These are older drivers, but will install and work perfectly fine. The driver links are located below.

• Note Windows 7 Users:Early Windows 7 versions or those Windows 7 versions that do not have the latest service packs may be unable to install the latest Windows 7 Drivers. Microsoft updated the driver signing policy to require 256 bit encryption that these older versions do not support. For those older Windows 7 users, simply use the Win XP specific drivers, as these use the older Microsoft signing policy and will work without issue. The driver links are located below.

Specifications

Symptoms

If you quickly and repeatedly insert and remove a USB device, the USB port may stop responding. When the port is in this state, it no longer recognizes any USB device, and the USB device will not work.
This article helps you fix the problem.

Prerequisites

You must use administrative credentials to log on to Windows to perform some of the troubleshooting methods that are listed in this article. If this is your personal computer, you are likely already logged on with an administrator account. If this is a computer that is part of a network at work, you might have to ask the system administrator for help.

Responsive Innovations USB Devices Driver

Resolution

To fix this problem, use the following methods in the order in which they are listed. After each method, check the USB device to see whether the problem is fixed. If the problem is not fixed, try the next method.
This article also includes a workaround that you can try if these methods do not work.

Method 1: Use Device Manager to scan for hardware changes

Use Device Manager to scan for hardware changes. After your computer scans for hardware changes, it might recognize the USB device that is connected to the USB port so that you can use the device.
To scan for hardware changes, follow these steps:

1. Click Start, and then click Run.
   Note If you are running Windows Vista, click Start, and then use the Start Search box.

2. Type devmgmt.msc, and then click OK. Device Manager opens.

3. In Device Manager, click your computer so that it is highlighted.

4. Click Action, and then click Scan for hardware changes.

5. Check the USB device to see whether it is working.

If scanning for hardware changes fixed the problem, you are finished. If this method did not fix the problem, go to Method 2.

Method 2: Restart the computer

If scanning for new hardware did not fix the problem, try restarting the computer. After the computer has restarted, check the USB device to see whether it is working.
If restarting the computer fixed the problem, you are finished. If this method did not fix the problem, go to Method 3.

Method 3: Disable and re-enable the USB controller

Use Device Manager to disable and re-enable all the USB controllers. This lets the controllers recover the USB port from its unresponsive condition. The USB controllers represent the USB ports in Device Manager. If you are not comfortable with advanced troubleshooting, try the steps in the 'Workaround' section.
To disable and re-enable the USB controllers, follow these steps:

1. Click Start, and then click Run.
   Note If you are running Windows Vista, click Start, and then use the Start Search box.

2. Type devmgmt.msc, and then click OK. Device Manager opens.

3. Expand Universal Serial Bus controllers.
   Note You might have to scroll down the list to find this item.

4. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it.

5. Repeat step 4 for each USB controller that is listed under Universal Serial Bus controllers.

6. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.

7. Check the USB device to see whether it is working.

If the USB port recognizes the device and if you can use the device, you are finished.
If this method fixed the problem, you are finished. If this method did not fix the problem, go to the 'Workaround' section.

Workaround

If none of these methods worked for you, you can disable the Selective Suspend feature. However, be aware that when the Selective Suspend feature is disabled, all USB host controller drivers (and therefore all USB ports and connected USB devices) in the system are affected. Therefore, your computer cannot suspend any USB devices that are connected to it, and the USB devices can continue to use power while connected to the computer. Additionally, the Allow the computer to turn off this device to save power check box does not appear on the Power Management tab for the USB Root Hub.
This section is intended for an advanced computer user.
You can disable the USB Selective Suspend feature as a workaround by editing the registry. The USB device may become unresponsive because of a race condition in the Selective Suspend feature. The Selective Suspend feature suspends the USB device to efficiently maintain battery power by enabling the computer to turn off the USB device. However, sometimes this feature may not correctly wake up the USB device. Therefore, the USB device is unresponsive when you try to use it.
You might want to disable this feature for server products where power management is not important or required.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

Responsive Innovations Usb Devices Driver Download

322756 How to back up and restore the registry in WindowsTo disable the Selective Suspend feature, follow these steps:

1. Click Start, and then click Run.
   Note If you are running Windows Vista, click Start, and then use the Start Search box.

2. Type regedit, and then click OK. Registry Editor opens.

3. Locate and then click the following registry subkey:

   HKEY_LOCAL_MACHINESystemCurrentControlSetServicesUSB

4. If the DisableSelectiveSuspend registry entry is present, double-click it. If it is not present, create the entry. To create the entry, follow these steps:

   1. On the Edit menu, point to New, and then click DWORD.

   2. Type DisableSelectiveSuspend, and then press ENTER.

   3. On the Edit menu, click Modify.

5. In the Value data field, type 1 to disable the Selective Suspend feature, and then click OK.

Now go to the 'Did this fix the problem?' section.

Cause

This problem may occur because of a timing issue that prevents the computer from detecting the USB device.
Microsoft and the hardware vendors that manufacture the chips that are used for USB have investigated the problem. However, the results were inconclusive because of the intermittent nature of the problem.

Status

Responsive Innovations Usb Devices Driver Windows 10

Microsoft is researching this problem and will post more information in this article when the information becomes available.