- Drivers Sekonic Port Devices Scanner
- Drivers Sekonic Port Devices Gigabit
- Drivers Sekonic Port Devices Replacement
Virtual COM port (VCP) drivers cause the USB device to appear as an additional COM port available to the PC. Application software can access the USB device in the This page contains the VCP drivers currently available for FTDI devices. For D2XX Direct drivers, please click here. Open the Device Manager by right clicking “My computer” and selecting control panel. Look under Ports (COM & LPT). You should see an open port named 'USB Serial Port' Right click on the 'USB Serial Port' and choose the 'Update Driver Software' option. Next, choose the 'Browse my computer for Driver software' option.
When the USB driver is installed for the Sekonic scanner, the software will assign a non-physical port like Com5 or Com7. To instruct Remark Classic OMR on which port to use:
- Locate the device driver by going to the System Icon in the Windows Control Panel and see what com port was assigned to the device.
- In Remark Classic OMR, go to Tools|Scanner Properties and select the proper com port. If no com port shows up then the USB driver has not been installed. You will need to install the driver from the CD that came with the scanner or contact Sekonic for the proper driver.
- Ensure that the computer's main user has Administrator rights and that they are the Local Administrator. The drivers may not install correctly without the Local Administrator being signed in.
After ensuring the user's rights, reinstall the drivers and reboot the system. The software should then interface properly with the scanner.
If the message persists after completing the above steps, please contact Remark Support and they will attempt to diagnose the issue further.
USB
You need to install driver supplied by SEKONIC
Make sure that the OMR device indicates 'SR-3500 Mode or SR-6500 Mode.'
(SR-3500 is set as 'SR-3500 Mode' at the factroy.)
(SR-3500 is set as 'SR-6500 Mode' at the factroy.)
Please refer to the manual of ypour OMR device for detail.
Drivers Sekonic Port Devices Scanner
No special set up for USB Connection required.
RS-232C
Select 'SR-600 Mode or SR-9000 Mode' in the OMR display.
Drivers Sekonic Port Devices Gigabit
You need to set uo for connecting theOMR device before use.
Drivers Sekonic Port Devices Replacement
This product is already set up at the factroy as follows: