Dell Precision M4400 Video Windows 8 X64 Driver Download. The TD-W9970 serves as a DSL modem and wireless router, combining two devices in one. Laptops, tablets, phones, TVs, game consoles, music streamers, cameras if it s WiFi enabled, it s X6 accelerated. Scan your computer for instant driver updates with just one click. GIC India is manufacturer of Interface Converters, USB TO RS232 Converter and RS232 to RS485 Converter with cost-effective solution.

1. Download Raytek Rsb Port Devices Driver Hub
2. Download Raytek Rsb Port Devices Driver License
3. Download Raytek Rsb Port Devices Driver

• 1APQ8016
  • 1.1Flash Pre-built Images
• 2i.MX6
  • 2.1Flash Pre-built Images

APQ8016

Currently we do not have a customized Windows 10 IoT Core image for Advantech APQ8016 projects. Fortunately, the image for Dragonboard 410c is also available on our devices, such as RSB-4760. Here, we will show you how to flash the Windows 10 IoT Core image into RSB-4760.

Download Raytek Rsb Port Devices Driver Hub

Flash Pre-built Images

Most of the steps below are based on 'Get Started' page from Microsoft. You can also refer to it for more details.

Step 1 : Get the tools

• OS requirement

Microsoft recommends to run Windows 10, but the following steps actually can work on Windows 7. You can choose one of them.

• Download and install the DragonBoard Update Tool

Download the DragonBoard Update Tool by selecting the download link appropriate for your PC: x86 or x64.

Extract the zip file and install on your desktop. The installer will create a shortcut to the DragonBoard Update Tool on your desktop and in your start menu, under Qualcomm->DragonBoardUpdate Tool.

• Download the DragonBoard Windows 10 IoT Core Image

Download Windows 10 IoT Core image from here.

Double click the downloaded ISO file. This will automatically mount the ISO as a new virtual CD-drive. (Look for a new CD-ROM drive)

The mounted virtual drive contains an installer file 'Windows_10_IoT_Core_for_QCDB410C.msi'. Double click the file to start the installation.

The installer creates a new directory: C:Program Files (x86)Microsoft IoTFFUQCDB410C which contains the DragonBoard410c image file 'flash.ffu'.

In Windows 7, this new directory is under C:Program FilesMicrosoft IoTFFU

Step 2 : Set up your device

• Set up your RSB-4760 device

First, you have to set the SW1 boot switch to enable download mode.

Both switch pins are set to ON, and power on the RSB-4760 device.

Then, connect a USB cable to the micro USB port and connect the other end to an empty USB port on your Host PC.

• Install Windows 10 IoT Core

Start the DragonBoard Update Tool you installed during the Step 1.

The Update Tool should detect the board and the Connection Status should show: 'Connected'.

In the DragonBoard Update Tool click the 'Browse' button and locate the Win10 IoT Core Image file you downloaded during Step 1.

Click the 'Program' Button and wait for the image to be downloaded to the board.

NOTE: The download will overwrite any previous content of the eMMC memory.

Once the download is complete, disconnect the power supply and microUSB cable from the board and change both the SW1 switch pins back to the OFF position.

The RSB-4760 is now ready to boot into Windows 10 IoT Core OS.

• First Boot

Connect Mouse, Keyboard and Display to the RSB-4760 and also insert a sdcard.

Because the definition of USB id pin are different to RSB-4760 and DragonBoard, the USB id is defined to sdcard detection GPIO on RSB-4760.

So, we have to cheat the device that USB host is ready by inserting a sdcard. Or, USB keyboard & mouse will be invalid.

NOTE: Make sure that the microUSB cable is not plugged-in, otherwise the USB devices will not be detected.

After a few seconds you should see the Win10 IoT boot-logo and shortly after you should see the Win10 IoT Core default application:

i.MX6

In this section, we will show you how to flash the Windows 10 IoT Core image into RSB-4411 QuadCore.

Flash Pre-built Images

The images we use here are compiled via project-kayla(Windows 10 IoT Core Board Support Package for iMX6).

Step 1 : Get the tools

• OS requirement

Only Windows 10 can work. It does not support Windows 7.

• Download and install Windows 10 IoT Core Dashboard tool

Download the Windows 10 IoT Core Dashboard from here.

• Download pre-built Windows 10 IoT Core Images

Please contact with Advantech for the images below:

• 1213HummingBoardTestOEMInput.xml.Release.ffu
• U-Boot, OP-TEE & UEFI images for RSB-4411

Step 2 : Flash images

• Flash FFU into sdcard

Start the Windows 10 IoT Core Dashboard you installed during the Step 1.

1. Select 'Custom' device type and choose the FFU image you downloaded.

2. Set a new Administrator password.

3. Accept the license terms and Install.

PS. If you get a provisioning warning, it's OK to ignore it and keeps going.

For RS5 image, you can skip the following operations and jump to step 3.

• Remove incompatible Display Driver

Insert the sdcard and find MainOS partition in File Explorer.

Rename or delete imx6dod.sys driver in MainOSWindowsSystem32drivers.

• Replace UEFI

Insert the sdcard and find EFIESP partition in File Explorer.

Put the new IMX6BOARD_EFI.fd file into it.

• Replace U-Boot & OP-TEE

Use dd command to flash images. If you are using Windows, use dd for Windows.

Step 3 : Set up your device

• Configure Ethernet

Windows 10 IoT Core OS reads ethernet MAC address from OCOTP. To write MAC address into OCOTP, you need an additional sdcard which runs official Yocto Linux OS. You can find the official release here. For RSB-4411, we can choose imx6LBV8090, and follow the instruction to flash sdcard.

After that, try to boot from the Yocto Linux sdcard and login.

1. Make sure the default values are ZERO.

2. Write the MAC address into OCOTP, e.g. 2A:1B:4C:3D:6E:5F

3. Double check if OCOTP is updated

Now, it's OK to boot up Windows 10 IoT Core!

• Set up your RSB-4411 device

Make sure the SW2 switch is set to 1:OFF and 2:ON.

• First Boot

Please DO NOT insert USB mouse & keyboard before booting up. Or, it may cause blink display problem.

After boot up, you can check if IP address is assigned correctly by DHCP.

[RS3] 16299

[RS5] 17744

Connecting to Your Device

You can use Windows Device Portal to connect to your device through your favorite web browser. The device portal provides configuration and device management capabilities, in addition to advanced diagnostic tools to help you troubleshoot and view the real time performance of your Windows IoT Device.

[RS3]

[RS5]

Steps:

1. Setup network connections on Windows 10 IoT Core

Download Raytek Rsb Port Devices Driver License

Device Settings -> Network & Wi-Fi

2. Make sure your host PC can reach the IP which Windows IoT Device gets.

3. Open your favorite web browser and go tohttp://<Windows IoT Device's IP address> :8080/, e.g.http://192.168.0.109:8080/

• username: Administrator
• password: p@ssw0rd

Download Raytek Rsb Port Devices Driver

4. Then, you are able to handle the Windows IoT Device via Windows Device Portal.

Additional Resources

There are some additional valuable resources for your reference.